For smooth and proper functioning of your Linksys Velop ax4200, you must update its firmware timely by accessing the Linksys Velop login page. However, many users face issues while updating the firmware of their Linksys Velop ax4200. If you are also among those, then consider yourself lucky because you have landed on the right post. In this post, we have mentioned some of the best troubleshooting tips that will help you get rid of Linksys Velop AX4200 firmware update failed error in a fly. Let’s hit the nail on the head!
Fixed: AX4200 Firmware Update Fail Issue
Fix 1: Reboot Your AX4200
Before you give any other troubleshooting tip a try, consider rebooting your Linksys Velop AX4200 first. Sometimes, a minor technical glitch can stop you from updating the firmware of your AX4200. But, luckily – rebooting or power cycling your Linksys Velop can be of great help.
Follow the instructions highlighted below and learn how to give your Linksys device a fresh start:
-
First things first, turn off your Linksys Velop AX4200.
-
Wait for a couple of minutes.
-
Then, plug in your AX4200 device back into a working wall outlet and turn it on.
Now, access the Linksys Velop login page and check whether you are able to update the firmware of your AX4200 or not. In case not, keep scrolling down!
Fix 2: Check the WiFi Connection
Chances are that your WiFi connection is not giving you expected internet range, resulting in the issue. To troubleshoot the issue, contact your internet service provider and make sure that everything is fine from your internet service provider’s end. Give him some time to fix the issue for you and also ask him to upgrade your existing data plan.
Fix 4: Keep WiFi Interference at Bay
90% of users across the globe don’t give attention towards the placement of their Linksys Velop AX4200. If you are also one of those who have committed the same mistake, then consider the following points and relocate your Linksys device:
-
First and foremost, ensure that your Linksys device is placed away from the reach of public WiFi.
-
Keep the Velop at the center-most area in your home near to your existing WiFi device.
-
Do not place AX4200 inside a cabinet.
-
Avoid placing your Linksys device too closer to roof.
Are you still experiencing Linksys Velop AX4200 firmware update failed issue? Ensure that you have performed and completed the Linksys Velop AX4200 setup process properly.
Still no luck? Well, in that case, head towards the next troubleshooting tip.
Fix 4: Download the Correct Firmware
Possibilities are that you haven’t downloaded the correct firmware version on your Linksys Velop, resulting in the issue. So, to get rid of the issue and to make the most out of your Linksys Velop, download the correct firmware version for your AX4200.
Steps to Perform Velop Firmware Update
-
Switch on your PC or laptop and open a web browser of your choice.
-
In the browser’s URL bar, enter the default IP of your Linksys Velop tri-band device.
-
Press the Enter key.
-
Linksys WiFi setup page will appear.
-
When prompted, fill in the default Linksys Velop login credentials (unless changed).
-
Click Log In or OK.
-
Once you’re logged in successfully, head over the Settings page of your device.
-
Follow the on-screen instructions.
And that’s it! In this way, you will be able to perform Linksys Velop AX4200 firmware update.
Also Read: Actualities of the Tplink WIFi router to improve WiFi
Our guide on how to troubleshoot Linksys Velop AX4200 firmware update failed issue ends here. Anticipating that after following the tips listed above, you will be able to fix the issue in a hassle-free manner.
On the off chance if you are still unable to fix the firmware update failure issue of your Linksys Velop device, it is advised that you waste no more time to drop your concerns into the comments section.
